Workshop services

ESL 204

It is well known that due to lack of power in the battery in W204,W207,etc...
Can cause malfunction of the Electric Steering Lock ESL , and as result , the key of the car stops working ...
Just send us the EZS+key then we activate  a new ESL and return it to you  !!! just install it in the car and start without any need of any diagnostic equipment ...

For any  further informations do not hesitate to contact us !

 
7 gear ETC

Resetting of used 7-Gearbox ECU: first variant, second variant, third variant!
Send us your old ECU, with the chassis number of the car where you want to install it.
We will reset it for you and change the chassis number, and install the latest programm inside with the original SCN coding!
0335456632: 0335456732: 0335457332: 0034460310: 0034460610 (for all kinds of ECU with the latest updates).

EZS

FOR THE 221, 216, 164, 204, 207, 212, 218, 166 it is possible to program a new key, even the car have no keys !!! (AMAZONAS, PALERMO, HAVANNA, NEW YORK, STUTTGART.....)
Just send us the EIS, and we can make for you the original key (or keys).
We can add, or re-enable, or generate keys for the latest models!
 

KEYS 1998-2012 :

   Key-supply service system: Just read the dump of the EIS ,and send it to us, and we shall send you the key programmed directly to you!

 For all kind of Mercedes cars, starting from year 1998 till 2012 with MOTOROLA processors, HAVANNA, PALERMO, AMAZONAS ready...

• A-class:   169                                        
• B-class:  245
• C-class:  202,203,204
• CLC-class: 203
• CLK-class: 208 , 209
• E-class: 210,211,212
• CLS-class: 219                                                         
• S-class: 220,221 and Maybach
• CL-class: 215,216
• SL-class: 230
• SLR-class: 199
• SLK-class: 171                                              
• M-class: 164
• G-class: 463
• GL-class: 164
• R-class: 251

Also for all kinds of VITO,VANEO,SPRINTER and VARIO series!

N.B: including cars with the new 7-Gearbox technology!

PRINCIPE:

Programming a key for a Mercedes car was never so easy!

Just follow these steps to get the fastest result to get a key: 

1. Read the bin-file of the EIS (EZS), using any programmer (ex: ETL, Rosfar, etc…)
2. Via internet, send us the bin file to the following e-mail: suppot@mehaco.com or mehaco2010@gmail.com
3. Within maximum 30 min we will send you back a key file that you need to program to your key-processor ( motorolla).
4. Without the need of modifying the file of the EIS, or touching any ECU of the car, or using any diagnostic device: just insert the programmed key into the EIS and start the car!
5. For vehicles based on NEC processors as w221, w204, w212 ...  you need to send us the EZS in our office...

BENEFITS:

• Using this system, will save a lot of hard work in extracting the Motronic and modifying the file in it, or extracting the ESL for resetting it, or extracting the ESM for resetting it!
• Using this system will let your car working with the original configuration, since the key dump that will be used is the original dump of the car!
• Using this system is vey usefull on 7-Gearbox cars since there is no need to extract the gearbox ECU for resetting it, and having after all kinds of problems during the SCN-coding!
• Using this system is very quick since the job is done in a maximum time of 30 min!
• While using this system you are sure that you will face no problems while programming or generating any new files!
• Using this system will keep the original configuration of the bin-file of the EIS(EZS), so like this, in the future if a new key is needed to be ordered from the dealer, you can be sure that it will work without any problems!