16.04.2013

Key Programming device Rang Rover, Land Rover, Jaguar

1. Plug adapter to OBD II, device will make short beep, LED is Yellow (adapter ready to
work).
2. If device make short beep, push "Unlock" button keep ~1 sec and release (this operation
can be repeated 2..4 times).
3. If device make long beep and LED is Green, push "Lock" button, push "Unlock" button,
training and testing finished.

If during training a device make 5 short beeps and LED is Red, training finished with error:
- procedure is performed not correct, try again.
- key is invalid or already closed on another vehicle, try another key.
- vehicle not supported.

If during training a device make 3 short beeps + 5 short beeps, and LED is red:
- vehicle already have maximum count of keys (8 pcs.).
- the new key is added to existing (old keys aren't erased)

Additional info:

- When training, keep key near to shift-box, between driver and passenger seats.
- "Lock" and "Unlock" buttons placed on the key.
- After training key is closed, and can't be used on another vehicle.

 
 Coverage list:

  =============================================================
Lang Rover Discovery IV | 2010, 2012 | L319 |
Range Rover Sport | 2010, 2012 | L320 |
Range Rover Mark III | 2010 | L322 |
Land Rover Freelander II | 2013 | L359 |
Range Rover Mark IV | 2013 | L405 |
Range Rover Evoque | 2012 | L538 |
------------------------------------------------------------------
Jaguar XF | 2013 | X250 |
Jaguar XJ | 2010, 2013 | X351 |

.

Download file: